Man Page

Manual Section... (2) - page: rt_sigaction

 

NAME

sigaction - examine and change a signal action  

SYNOPSIS

#include <signal.h>

int sigaction(int signum, const struct sigaction *act,
              struct sigaction *oldact);

Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

sigaction(): _POSIX_C_SOURCE >= 1 || _XOPEN_SOURCE || _POSIX_SOURCE  

DESCRIPTION

The sigaction() system call is used to change the action taken by a process on receipt of a specific signal. (See signal(7) for an overview of signals.)

signum specifies the signal and can be any valid signal except SIGKILL and SIGSTOP.

If act is non-NULL, the new action for signal signum is installed from act. If oldact is non-NULL, the previous action is saved in oldact.

The sigaction structure is defined as something like:

struct sigaction {
    void     (*sa_handler)(int);
    void     (*sa_sigaction)(int, siginfo_t *, void *);
    sigset_t   sa_mask;
    int        sa_flags;
    void     (*sa_restorer)(void);
};

On some architectures a union is involved: do not assign to both sa_handler and sa_sigaction.

The sa_restorer element is obsolete and should not be used. POSIX does not specify a sa_restorer element.

sa_handler specifies the action to be associated with signum and may be SIG_DFL for the default action, SIG_IGN to ignore this signal, or a pointer to a signal handling function. This function receives the signal number as its only argument.

If SA_SIGINFO is specified in sa_flags, then sa_sigaction (instead of sa_handler) specifies the signal-handling function for signum. This function receives the signal number as its first argument, a pointer to a siginfo_t as its second argument and a pointer to a ucontext_t (cast to void *) as its third argument.

sa_mask specifies a mask of signals which should be blocked (i.e., added to the signal mask of the thread in which the signal handler is invoked) during execution of the signal handler. In addition, the signal which triggered the handler will be blocked, unless the SA_NODEFER flag is used.

sa_flags specifies a set of flags which modify the behavior of the signal. It is formed by the bitwise OR of zero or more of the following:

SA_NOCLDSTOP
If signum is SIGCHLD, do not receive notification when child processes stop (i.e., when they receive one of SIGSTOP, SIGTSTP, SIGTTIN or SIGTTOU) or resume (i.e., they receive SIGCONT) (see wait(2)). This flag is only meaningful when establishing a handler for SIGCHLD.
SA_NOCLDWAIT (Since Linux 2.6)
If signum is SIGCHLD, do not transform children into zombies when they terminate. See also waitpid(2). This flag is only meaningful when establishing a handler for SIGCHLD, or when setting that signal's disposition to SIG_DFL.

If the SA_NOCLDWAIT flag is set when establishing a handler for SIGCHLD, POSIX.1 leaves it unspecified whether a SIGCHLD signal is generated when a child process terminates. On Linux, a SIGCHLD signal is generated in this case; on some other implementations, it is not.

SA_NODEFER
Do not prevent the signal from being received from within its own signal handler. This flag is only meaningful when establishing a signal handler. SA_NOMASK is an obsolete, nonstandard synonym for this flag.
SA_ONSTACK
Call the signal handler on an alternate signal stack provided by sigaltstack(2). If an alternate stack is not available, the default stack will be used. This flag is only meaningful when establishing a signal handler.
SA_RESETHAND
Restore the signal action to the default state once the signal handler has been called. This flag is only meaningful when establishing a signal handler. SA_ONESHOT is an obsolete, nonstandard synonym for this flag.
SA_RESTART
Provide behavior compatible with BSD signal semantics by making certain system calls restartable across signals. This flag is only meaningful when establishing a signal handler. See signal(7) for a discussion of system call restarting.
SA_SIGINFO (since Linux 2.2)
The signal handler takes 3 arguments, not one. In this case, sa_sigaction should be set instead of sa_handler. This flag is only meaningful when establishing a signal handler.

The siginfo_t argument to sa_sigaction is a struct with the following elements:

siginfo_t {
    int      si_signo;    /* Signal number */
    int      si_errno;    /* An errno value */
    int      si_code;     /* Signal code */
    int      si_trapno;   /* Trap number that caused
                             hardware-generated signal
                             (unused on most architectures) */
    pid_t    si_pid;      /* Sending process ID */
    uid_t    si_uid;      /* Real user ID of sending process */
    int      si_status;   /* Exit value or signal */
    clock_t  si_utime;    /* User time consumed */
    clock_t  si_stime;    /* System time consumed */
    sigval_t si_value;    /* Signal value */
    int      si_int;      /* POSIX.1b signal */
    void    *si_ptr;      /* POSIX.1b signal */
    int      si_overrun;  /* Timer overrun count; POSIX.1b timers */
    int      si_timerid;  /* Timer ID; POSIX.1b timers */
    void    *si_addr;     /* Memory location which caused fault */
    int      si_band;     /* Band event */
    int      si_fd;       /* File descriptor */
}

si_signo, si_errno and si_code are defined for all signals. (si_errno is generally unused on Linux.) The rest of the struct may be a union, so that one should only read the fields that are meaningful for the given signal:

*
POSIX.1b signals and SIGCHLD fill in si_pid and si_uid.
*
POSIX.1b timers (since Linux 2.6) fill in si_overrun and si_timerid. The si_timerid field is an internal ID used by the kernel to identify the timer; it is not the same as the timer ID returned by timer_create(2).
*
SIGCHLD fills in si_status, si_utime and si_stime. The si_utime and si_stime fields do not include the times used by waited-for children (unlike getrusage(2) and time(2)). In kernels up to 2.6, and since 2.6.27, these fields report CPU time in units of sysconf(_SC_CLK_TCK). In 2.6 kernels before 2.6.27, a bug meant that these fields reported time in units of the (configurable) system jiffy (see time(7)).
*
si_int and si_ptr are specified by the sender of the POSIX.1b signal. See sigqueue(2) for more details.
*
SIGILL, SIGFPE, SIGSEGV, and SIGBUS fill in si_addr with the address of the fault. SIGPOLL fills in si_band and si_fd.

si_code is a value (not a bit mask) indicating why this signal was sent. The following list shows the values which can be placed in si_code for any signal, along with reason that the signal was generated.

SI_USER
kill(2) or raise(3)
SI_KERNEL
Sent by the kernel.
SI_QUEUE
sigqueue(2)
SI_TIMER
POSIX timer expired
SI_MESGQ
POSIX message queue state changed (since Linux 2.6.6); see mq_notify(3)
SI_ASYNCIO
AIO completed
SI_SIGIO
queued SIGIO
SI_TKILL
tkill(2) or tgkill(2) (since Linux 2.4.19)

The following values can be placed in si_code for a SIGILL signal:

ILL_ILLOPC
illegal opcode
ILL_ILLOPN
illegal operand
ILL_ILLADR
illegal addressing mode
ILL_ILLTRP
illegal trap
ILL_PRVOPC
privileged opcode
ILL_PRVREG
privileged register
ILL_COPROC
coprocessor error
ILL_BADSTK
internal stack error

The following values can be placed in si_code for a SIGFPE signal:

FPE_INTDIV
integer divide by zero
FPE_INTOVF
integer overflow
FPE_FLTDIV
floating-point divide by zero
FPE_FLTOVF
floating-point overflow
FPE_FLTUND
floating-point underflow
FPE_FLTRES
floating-point inexact result
FPE_FLTINV
floating-point invalid operation
FPE_FLTSUB
subscript out of range

The following values can be placed in si_code for a SIGSEGV signal:

SEGV_MAPERR
address not mapped to object
SEGV_ACCERR
invalid permissions for mapped object

The following values can be placed in si_code for a SIGBUS signal:

BUS_ADRALN
invalid address alignment
BUS_ADRERR
nonexistent physical address
BUS_OBJERR
object-specific hardware error

The following values can be placed in si_code for a SIGTRAP signal:

TRAP_BRKPT
process breakpoint
TRAP_TRACE
process trace trap

The following values can be placed in si_code for a SIGCHLD signal:

CLD_EXITED
child has exited
CLD_KILLED
child was killed
CLD_DUMPED
child terminated abnormally
CLD_TRAPPED
traced child has trapped
CLD_STOPPED
child has stopped
CLD_CONTINUED
stopped child has continued (since Linux 2.6.9)

The following values can be placed in si_code for a SIGPOLL signal:

POLL_IN
data input available
POLL_OUT
output buffers available
POLL_MSG
input message available
POLL_ERR
i/o error
POLL_PRI
high priority input available
POLL_HUP
device disconnected
 

RETURN VALUE

sigaction() returns 0 on success and -1 on error.  

ERRORS

EFAULT
act or oldact points to memory which is not a valid part of the process address space.
EINVAL
An invalid signal was specified. This will also be generated if an attempt is made to change the action for SIGKILL or SIGSTOP, which cannot be caught or ignored.
 

CONFORMING TO

POSIX.1-2001, SVr4.  

NOTES

A child created via fork(2) inherits a copy of its parent's signal dispositions. During an execve(2), the dispositions of handled signals are reset to the default; the dispositions of ignored signals are left unchanged.

According to POSIX, the behavior of a process is undefined after it ignores a SIGFPE, SIGILL, or SIGSEGV signal that was not generated by kill(2) or raise(3). Integer division by zero has undefined result. On some architectures it will generate a SIGFPE signal. (Also dividing the most negative integer by -1 may generate SIGFPE.) Ignoring this signal might lead to an endless loop.

POSIX.1-1990 disallowed setting the action for SIGCHLD to SIG_IGN. POSIX.1-2001 allows this possibility, so that ignoring SIGCHLD can be used to prevent the creation of zombies (see wait(2)). Nevertheless, the historical BSD and System V behaviors for ignoring SIGCHLD differ, so that the only completely portable method of ensuring that terminated children do not become zombies is to catch the SIGCHLD signal and perform a wait(2) or similar.

POSIX.1-1990 only specified SA_NOCLDSTOP. POSIX.1-2001 added SA_NOCLDWAIT, SA_RESETHAND, SA_NODEFER, and SA_SIGINFO. Use of these latter values in sa_flags may be less portable in applications intended for older Unix implementations.

The SA_RESETHAND flag is compatible with the SVr4 flag of the same name.

The SA_NODEFER flag is compatible with the SVr4 flag of the same name under kernels 1.3.9 and newer. On older kernels the Linux implementation allowed the receipt of any signal, not just the one we are installing (effectively overriding any sa_mask settings).

sigaction() can be called with a null second argument to query the current signal handler. It can also be used to check whether a given signal is valid for the current machine by calling it with null second and third arguments.

It is not possible to block SIGKILL or SIGSTOP (by specifying them in sa_mask). Attempts to do so are silently ignored.

See sigsetops(3) for details on manipulating signal sets.

See signal(7) for a list of the async-signal-safe functions that can be safely called inside from inside a signal handler.  

Undocumented

Before the introduction of SA_SIGINFO it was also possible to get some additional information, namely by using a sa_handler with second argument of type struct sigcontext. See the relevant kernel sources for details. This use is obsolete now.  

BUGS

In kernels up to and including 2.6.13, specifying SA_NODEFER in sa_flags prevents not only the delivered signal from being masked during execution of the handler, but also the signals specified in sa_mask. This bug was fixed in kernel 2.6.14.  

EXAMPLE

See mprotect(2).  

SEE ALSO

kill(1), kill(2), killpg(2), pause(2), sigaltstack(2), signal(2), signalfd(2), sigpending(2), sigprocmask(2), sigqueue(2), sigsuspend(2), wait(2), raise(3), siginterrupt(3), sigsetops(3), sigvec(3), core(5), signal(7)  

COLOPHON

This page is part of release 3.24 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/.


 

Index

NAME
SYNOPSIS
DESCRIPTION
RETURN VALUE
ERRORS
CONFORMING TO
NOTES
Undocumented
BUGS
EXAMPLE
SEE ALSO
COLOPHON

This document was created by man2html, using the manual pages.
Time: 15:26:26 GMT, June 11, 2010

Leave a Reply

You must be logged in to post a comment.